September 2008

  • 1
  • 2

Battling Nonpoint-Source Pollution Head-On

Volunteers help with storm drain marking

Article Tools

Create a Link to this Article

Additional Article Content

By Eric Sween

Comments

It’s no small task to bring together a community to inform the public of the hazards of nonpoint-source pollution. Since the state of New Jersey Department of Environmental Protection announced that up to 60% of drinking-water problems have been caused by storm drain runoff, the Bethlehem Township Environmental Commission has embarked upon an action plan. The objective was to educate citizens on how we all play a part in the solution to pollution. The commission responded to the state’s stormwater management education requirements in part by doing storm drain marking.

Selecting a Marker
The first step in our campaign was to determine which type of marker we wanted to use. Our options consisted of stenciling, plastic plaques, and metal markers or of replacing the existing storm drains with expensive precast storm drains containing a message warning citizens not to dump pollutants into the drains.

From past experience, we have learned that stenciling, although inexpensive, is messy and lasts only about two years. After a while, it ends up looking like graffiti and needs to be reapplied. It also poses a safety concern because of the aerosol spray paints used, and when the paint washes away, it goes down the same drains we’re trying to protect.

Precast storm drains are the most costly option and require professional installation. Plastic plaques do not last as long as metal because they can crack, chip, and fade over time. We were also concerned about the tripping hazards of using plastic. After the adhesive is applied, the plaques sit up higher on the pavement than the metal markers, which have a turned-down edge. For that reason and the fact that the metal markers have a 30-year warranty, we elected to go with Almetek Industries’ stainless steel markers.

Embossed, 3D storm drain markers were quickly and easily installed.

It’s important to choose a product that you’re confident in and that is cost effective. The markers we chose were 4 inches in diameter and 3D-embossed for long-lasting legibility. They install easily and quickly and will remain permanently in place. They can be installed on virtually any surface and offer a variety of installation options. Because they are guaranteed for decades, we won’t have to replace them every few years.

Nearly all markers or plaques used on storm drains discourage deliberate dumping. Some communities focus on a particular material, such as motor oil, while others warn against the dumping of chemicals. Regardless of the message, the most important idea to get across is that storm drains lead to open waterways.

Some communities specify on the markers which type of waterway the inlet drains into—for example “Drains to Creek” or “Drains to River.” Graphics can be used to refer to some specific topic or local interest. Chesapeake Bay, MD, used the image of a crab on its markers to remind passersby that pollutants dumped into the storm drains will go into the bay and will harm the crab industry. Almetek Industries offers markers with various types of wildlife symbols (frogs, fish, lobsters, turtles, etc.). We chose a metal marker, painted blue, with a fish in the middle. The marker reads “No Dumping–Drains to River.”

Organizing Volunteers
The second step is to determine who will be marking the storm drains, and this can be carried out in a variety of different ways. In some cases, communities use their own public works staff to do all markings. These towns may feel that having their own crews do the work produces better results and eliminates liability and safety concerns. However, in our area, volunteer groups are a necessity.

If a civic group, association, or local environmental group initiates the project, it must obtain the support and cooperation of local authorities. Storm drains are city or township property, and local ordinances or policies may prohibit marking them without permission. Most communities will want certain safety measures in place before volunteers can start marking storm drains.

In New Jersey, it is more common for storm drain marking programs to use volunteer groups for labor, with the city or township providing supplies, safety equipment, and other forms of support. Either side may initiate this public/private partnership. Our project helped fulfill the New Jersey stormwater education requirements under the new stormwater management regulations. Next Page >

  • 1
  • 2

What Do You Think?

Post a Comment

Be the first to tell us what you think!

Post a Comment

Not a subscriber? Sign Up
 
 
*  
 




 

Get Stormwater E-mail Updates!

Get weekly news and updates through our Stormwater e-mail newsletter!